Biomarker Lens

Common biomarkers

  • Hemoglobin
  • Glucose
  • ALT
  • Apolipoprotein B
  • C-Reactive Protein, Cardiac
  • Ferritin
  • Alb/Creat Ratio, Urine
  • Alkaline Phosphatase
  • FSH
  • T4,Free(Direct)

Biomarkers · Chemical

C. trachomatis, NAA, Rectal, Anal

LOINC codes
57287-5
Tests that measure C. trachomatis, NAA, Rectal, Anal
Labcorp 3

Tests

Check the catalog code, specimen, method and preparation for every test that measures C. trachomatis, NAA, Rectal, Anal. Select up to five tests to compare them side by side.

Labcorp 3 tests

Single-analyte tests

  • Chlamydia trachomatis , Rectal Swab, NAA 188706

    Swab · Fasting not stated · Turnaround 2 - 3 days

    Method and collection
    Method
    Nucleic acid amplification (NAA)
    Collection
    Partially peel open the swab package. Remove the swab. Do not touch the soft tip or lay the swab down. If the soft tip is touched, the swab is laid down or the swab is dropped, use a new Aptima Multitest Swab Specimen Collection Kit. Hold the swab, placing your thumb and forefinger in the middle of the swab shaft covering the score line. Do not hold the swab shaft below the score line. Carefully insert the swab into the rectum about 1 to 2 inches (3 to 5 cm) past the anal margin and gently rotate the swab clockwise for five to 10 seconds. Withdraw the swab without touching the skin. While holding the swab in the same hand, unscrew the cap from the tube. Do not spill the contents of the tube. If the contents of the tube are spilled, use a new Aptima Multitest Swab Specimen Collection Kit. Immediately place the swab into the transport tube so that the score line is at the top of the tube. Carefully break the swab shaft at the score line against the side of the tube. Immediately discard the top portion of the swab shaft. Tightly screw the cap onto the tube.
    Labcorp catalog page

Panels that include this biomarker

  • Chlamydia/Gonococcus , Rectal Swab, NAA 188672

    2 analytes · Swab · Fasting not stated · Turnaround 2 - 3 days

    Method and collection
    Method
    Nucleic acid amplification (NAA)
    Collection
    Partially peel open the swab package. Remove the swab. Do not touch the soft tip or lay the swab down. If the soft tip is touched, the swab is laid down or the swab is dropped, use a new Aptima Multitest Swab Specimen Collection Kit. Hold the swab, placing your thumb and forefinger in the middle of the swab shaft covering the score line. Do not hold the swab shaft below the score line. Carefully insert the swab into the rectum about 1 to 2 inches (3 to 5 cm) past the anal margin and gently rotate the swab clockwise for five to 10 seconds. Withdraw the swab without touching the skin. While holding the swab in the same hand, unscrew the cap from the tube. Do not spill the contents of the tube. If the contents of the tube are spilled, use a new Aptima Multitest Swab Specimen Collection Kit. Immediately place the swab into the transport tube so that the score line is at the top of the tube. Carefully break the swab shaft at the score line against the side of the tube. Immediately discard the top portion of the swab shaft. Tightly screw the cap onto the tube.
    Labcorp catalog page

  • PrEP Use Only: Chlamydia/Gonococcus , Rectal Swab, NAA 188725

    2 analytes · Swab · Fasting not stated · Turnaround 2 - 3 days

    Method and collection
    Method
    Nucleic acid amplification (NAA)
    Collection
    Partially peel open the swab package. Remove the swab. Do not touch the soft tip or lay the swab down. If the soft tip is touched, the swab is laid down or the swab is dropped, use a new Aptima Multitest Swab Specimen Collection Kit. Hold the swab, placing your thumb and forefinger in the middle of the swab shaft covering the score line. Do not hold the swab shaft below the score line. Carefully insert the swab into the rectum about 1 to 2 inches (3 to 5 cm) past the anal margin and gently rotate the swab clockwise for five to 10 seconds. Withdraw the swab without touching the skin. While holding the swab in the same hand, unscrew the cap from the tube. Do not spill the contents of the tube. If the contents of the tube are spilled, use a new Aptima Multitest Swab Specimen Collection Kit. Immediately place the swab into the transport tube so that the score line is at the top of the tube. Carefully break the swab shaft at the score line against the side of the tube. Immediately discard the top portion of the swab shaft. Tightly screw the cap onto the tube.
    Labcorp catalog page

0 of 5 tests selected

Pick one more

Sources

Verify these ranges and sources

We compile this page from named laboratory catalogs, guidelines and studies. Labs calculate reference intervals from the people they test, for one assay method and one population group, so an interval describes that population rather than an optimal target.

Interpret your own results with a licensed clinician, or track your lab history and health goals in Aumnivida.

Spotted an error? Email hello@biomarkerlens.com with the page URL and the primary source that corrects the entry.