Biomarkers · Chemical
Component 1, Stone
- LOINC codes
- 9795-6
- Tests that measure Component 1, Stone
- Quest Diagnostics 2
Tests
Check the catalog code, specimen, method and preparation for every test that measures Component 1, Stone. Select up to five tests to compare them side by side.
Quest Diagnostics 2 tests
Panels that include this biomarker
Stone Analysis without Image 90253
3 analytes · Dry stone(s) collected in a plastic sterile screw-cap container · Fasting not stated · Turnaround Set up: Daily
Quest Diagnostics catalog pageMethod and collection
- Method
- Infrared Spectroscopy (Fourier Transform Infrared Spectroscopy) • Stone weight: Gravimetric
- Collection
- 1. Clean any blood or foreign material from the stone with water. 2. Stone should be air dried thoroughly at room temperature for approximately 24 hours. A dry stone should not stick to the walls of the walls of the plastic container. 3. Important: Do not tape specimen; Do not send stone in formalin, surgical gel, or any transport media; Avoid sending filters and cotton swabs (Q-tips) 4. Additional processing is required for stones received with residual liquid or dampness, potentially causing delays in testing. 5. In cases for multiple stones that require individual analysis, testing must be ordered for each stone and will be charged separately. Each stone should be placed in its own plastic container. 6. Indicate source of specimen on outside of container (e.g., left kidney, bladder, right ureter).
- Reference notes
- See Laboratory Report
Stone Analysis with Image 30260
4 analytes · Dry stone(s) collected in a plastic sterile screw-cap container · Fasting not stated · Turnaround Set up: Mon-Fri; Report available: 8 days
Quest Diagnostics catalog pageMethod and collection
- Method
- Infrared Spectroscopy (Fourier Transform Infrared Spectroscopy) • Stone Weight: Gravimetric
- Collection
- 1. Clean any blood or foreign material from the stone with water. 2. Stone should be air dried thoroughly at room temperature for approximately 24 hours. A dry stone should not stick to the walls of the walls of the plastic container. 3. Important: Do not tape specimen; Do not send stone in formalin, surgical gel, or any transport media; Avoid sending filters and cotton swabs (Q-tips) 4. Additional processing is required for stones received with residual liquid or dampness, potentially causing delays in testing. 5. In cases for multiple stones that require individual analysis, testing must be ordered for each stone and will be charged separately. Each stone should be placed in its own plastic container. 6. Indicate source of specimen on outside of container (e.g., left kidney, bladder, right ureter).
- Reference notes
- See Laboratory Report
0 of 5 tests selected
Pick one moreSources
Quest Diagnostics test catalog
2 tests: codes, specimens, methods, preparation and reference intervals.
LOINC 9795-6
Regenstrief Institute codes that identify the same result across labs.
Search ClinicalTrials.gov for Component 1, Stone
Registered studies that measure Component 1, Stone, on the U.S. National Library of Medicine registry.
Verify these ranges and sources
We compile this page from named laboratory catalogs, guidelines and studies. Labs calculate reference intervals from the people they test, for one assay method and one population group, so an interval describes that population rather than an optimal target.
Interpret your own results with a licensed clinician, or track your lab history and health goals in Aumnivida.
Spotted an error? Email hello@biomarkerlens.com with the page URL and the primary source that corrects the entry.